PRIVATE LABEL CLOTHING MANUFACTURER
Custom-manufactured apparel, private label, white label, or OEM, built precisely to your specification with every material, trim, and tolerance documented and verified.
SEWN TO SPEC.
Every material, trim, and tolerance is written down before anything is cut. The specification is the contract.
DOUBLE-NEEDLE TOPSTITCH
1/4" or 1/16" gauge
FLATLOCK SEAMS
Athletic, no-chafe finish
COVERSTITCH HEM & CUFF
3-needle, looper-secured
BARTACK REINFORCEMENT
42-stitch at stress points
TAPED SEAMS
Hot-air, waterproof shells
BLIND, FRENCH AND SERGED HEMS
Selectable per construction
HEAVY-FABRIC CAPABILITY
Denim · canvas · leather
AQL 2.5 IN-LINE QC
Per-100-units sampling
WHATEVER STAGE YOU'RE IN.
Send a pattern file, a reference garment or a sketch. Each route ends in the same signed-off spec.
You ship the pattern
PDF, DXF or AAMA. We digitise it, true the lines and grade XXS to 5XL against your fit standard.
You ship a reference
A garment that already works. We take it apart, draft a new pattern and re-spec it for your fit, fabric and tolerance.
We draft from scratch
A sketch, a moodboard or a written brief. We take it from tech pack to sealed sample.
FROM TECH PACK TO PALLET
Six stages in a three-week cycle, run in audited factories. No stage starts without a sign-off.
BRIEF INTAKE
Send a tech pack, a reference garment or a sketch. We turn it into a production-ready spec.
Day 0–1
SAMPLING
First proto, then up to two free revisions before the sealed sample is signed off. That sample becomes the production standard.
Day 1–7
PRE-PRODUCTION AUDIT
Bulk fabric, trims and branding are checked against the sealed sample before cutting. Any substitution needs your approval.
Day 7–9
PRODUCTION
Dedicated lines with in-line QC. Embroidery, print and finishing run on synchronised stations.
Day 9–17
FINAL INSPECTION
A full AQL 2.5 audit with a photographic record. An independent inspection can be added before sign-off.
Day 17–19
LOGISTICS
Folded, polybagged and cartonised. Shipped from Hungary or Spain, to one destination or several, customs paperwork included.
Day 19–21
OPERATING PARAMETERS
Fixed before you commit. Every quote, sample and bulk run is built on these figures.
- Minimum order
- 100 units per style
- Sample lead time
- 10–14 days
- Bulk lead time
- 2–3 weeks
- Repeat orders
- 20 days
- Defect tolerance
- AQL 2.5
- QC stages
- 3: sample, pre-production, final
- Origin mills
- HU · TR · ES
- Dispatch hubs
- HU · ES
BRANDING TECHNIQUES
Choose a method, or send your brand guide and we specify it for you.
3D PUFF EMBROIDERY
High-density foam embroidery for raised logos, on Tajima multi-head machines. Best on caps, hoodies and outerwear.
Up to 12k stitch · 6mm raise
SCREEN PRINT, DTF, SUBLIMATION
Soft-hand plastisol, water-based discharge, DTF for short runs and stretch fabrics, and full-piece sublimation to the edge.
240 DPI · CMYKW+OG · DTF film
WOVEN AND DAMASK LABELS
Centre-fold, end-fold or manhattan-fold, ultrasonic or hot-cut. 14 days direct from the mill.
Up to 8 colors · ≥120 yarn count
HANG TAGS AND CARE LABELS
Custom card stock with foil, emboss or deboss. EU-compliant care labels in any language.
350 GSM · soy-based ink
HARDWARE AND TRIMS
Engraved zipper pulls, cord stoppers, rivets, snaps and custom-plated finishes.
Brass · zinc · custom plate
HEAT TRANSFER AND REFLECTIVE
Soft-hand HTV for stretch fabrics and retroreflective transfers for hi-vis workwear.
PU film · 3M Scotchlite
3D PUFF EMBROIDERY
High-density foam embroidery for raised logos, on Tajima multi-head machines. Best on caps, hoodies and outerwear.
Up to 12k stitch · 6mm raise
SCREEN PRINT, DTF, SUBLIMATION
Soft-hand plastisol, water-based discharge, DTF for short runs and stretch fabrics, and full-piece sublimation to the edge.
240 DPI · CMYKW+OG · DTF film
WOVEN AND DAMASK LABELS
Centre-fold, end-fold or manhattan-fold, ultrasonic or hot-cut. 14 days direct from the mill.
Up to 8 colors · ≥120 yarn count
HANG TAGS AND CARE LABELS
Custom card stock with foil, emboss or deboss. EU-compliant care labels in any language.
350 GSM · soy-based ink
HARDWARE AND TRIMS
Engraved zipper pulls, cord stoppers, rivets, snaps and custom-plated finishes.
Brass · zinc · custom plate
HEAT TRANSFER AND REFLECTIVE
Soft-hand HTV for stretch fabrics and retroreflective transfers for hi-vis workwear.
PU film · 3M Scotchlite
ENGINEERED DETAIL.
Closures, pulls and trims are specified to your brand and sourced direct from the mill.
- YKK and mill-direct zippers
- G-type · vislon · invisible
- Custom-colour zipper tape
- Pantone matched dye
- Engraved and plated pulls
- Brass · gunmetal · custom plate
- Two-way and waterproof zippers
- AquaGuard · YKK 5VS
- Snaps, eyelets and rivets
- Spring · ring · capped
- Drawcords and tips
- Round · flat · metal-tipped
- Custom buttons
- Corozo · horn · metal · stamped
- Hang tags and woven tape
- Foil · emboss · 4-color
PANTONE CONTROL.
PMS-matched dyehouse runs, with a lab dip approved on every colourway. Garment-dyed or piece-dyed. Colour is locked before production starts.
ΔE ≤1.5
Maximum colour deviation between batches, below what the eye can detect.
Lab dip 01
Lab dip 02
Approved standard
Production match
Garment wash
Piece dyed
Reference
Custom PMS
FREQUENTLY ASKED
QUESTIONS & ANSWERS
Common questions about our services, ordering process, and partnership requirements.
Yes. Private label production runs under your own name with optional pattern replication and a full range of branding applications: 3D puff embroidery, screen print, DTF, sublimation, woven and damask labels, hang tags and care labels, custom hardware and trims, and heat transfer or reflective detailing. Every branding and production specification is confirmed in your production quote before production starts.
All three entry points are supported. You can ship us a finished pattern, ship a reference garment for us to measure and draft from, or hand over a brief and have us draft from scratch. Patterns are digitised and graded across the size run, and we return them in PDF, DXF, or AAMA format.
Colour is locked in three stages: a lab dip you approve, a bulk approval against that dip, and a production lock for the run. Maximum colour deviation across batches is held to a ΔE of 1.5 or better, so a reorder matches the batch before it.
Private label starts at 100 units per style, the same minimum as blanks. Custom specifications can move that figure, so the MOQ for your particular build is confirmed in the production quote before any deposit is taken. The full volume-break ladder and account tiers are published on the Pricing page.
The lifecycle runs brief intake, sampling, pre-production audit, production (cut, sew, brand), final inspection at AQL 2.5, and cartonised dispatch. Custom production is typically 2–3 weeks once the pre-production sample is approved, plus shipping. Submit a tech pack, reference garment, or brand book and the engineering desk returns a costed production plan within 5 business days.
Still have questions?
Contact our team at info@888wholesale.co or call us during business hours.
SHIP US YOUR BLUEPRINTS.
Send your tech pack, a reference garment or your brand book. You get a costed production plan within 5 business days.